E07-m1101d Pinout =link= -

#include <RadioLib.h> #include <SPI.h>

Looking at the module from the (shielded can facing up), the pads are arranged as follows:

Data sent from the E07-M1101D back to the microcontroller Done.Land .

Even with the correct , errors happen. Here are the top 5 mistakes: e07-m1101d pinout

Before diving into the pinout, it helps to know what this module is. The is a "DIP" (Dual Inline Package) wireless module. It has a transmission power of up to 10dBm (10mW) and can achieve communication distances up to 600 meters under ideal conditions in open areas. Its core is the industrial-grade CC1101 chip from Texas Instruments, which supports a variety of modulation modes, including OOK, ASK, GFSK, 2-FSK, 4-FSK, and MSK. Its programmable data rate ranges from 0.6kbps to 500kbps.

E07-M1101D Pinout and Comprehensive Guide to the Ebyte CC1101 Transceiver

The module is commonly wired through a 4-wire SPI interface and includes two configurable digital output pins for hardware interrupts or status monitoring. device.report Pin Number Description Ground connection. Supply voltage: 1.8V to 3.6V . (Exceeding 3.6V will damage the module). #include <RadioLib

The recommended working parameters are:

Below is the complete physical pin mapping and functionality breakdown as specified in the official Ebyte User Manual :

: These are typically used for interrupts to detect when a packet is received or sent. E07-M1101D Module, - Networking, Protocols, and Devices The is a "DIP" (Dual Inline Package) wireless module

The is a powerhouse for sub-GHz communication, but its compact 8-pin layout can be a "gotcha" for those used to standard TI reference designs. Once you have the pins mapped out, it’s one of the most reliable and long-range modules in its class. Ready to start your first transmission?

This comprehensive guide breaks down the physical layout, pin definitions, core specifications, and exact wiring diagrams required to get your hardware communication up and running seamlessly. E07-M1101D Physical Pinout Configuration

Some integrations, like the "ESPSomfy-RTS" project, use a different mapping. A working alternative for an ESP32 Dev Kit is: GDO0→GPIO 4, CSN→GPIO 13, SCK→GPIO 14, MOSI→GPIO 15, MISO→GPIO 16, GDO2→GPIO 36.