If you bought a 2TB drive that actually holds 16GB, the MP Tool will flash new firmware, properly mapping the drive to its real capacity.
: An older branch that supports a wider range of sub-variants like FC1179S and FC1179AB. Modification Utility ( FC1178/FC1179 ApTools
Disconnect the USB drive, wait 5 seconds, and plug it back in. Windows should now prompt you to format the drive normally, restoring it to full operational health. Troubleshooting Common Errors "No Device Found" or Drive Not Detected
IV. Changelog
Right-click the executable and select . If the interface loads in Chinese, navigate to the Language toggle sidebar on the right edge of the screen and check English . 2. Access the Setup Settings
If the above is down, a community-maintained backup exists:
: Works with a wide variety of NAND flash types. firstchip fc1179 firmware link
FlashBoot iFlash Search – Use this database to look up your specific flash memory vendor code to see which FirstChip tool version successfully repaired identical drives. APTool vs. MPTool: Which should you download?
Tip: Always download the latest version available, but keep older versions on hand. Sometimes older tool versions recognize specific older NAND chips better than new releases. Step-by-Step Guide to Flashing FirstChip FC1179 Firmware
Download the latest FirstChip MPTool package matching your FC1179 chip from the repositories listed above. Extract the .zip or .rar archive to a dedicated folder on your desktop. If you bought a 2TB drive that actually
This write-up explores what the FC1179 is, why the firmware is so elusive, and the reality of "firmware links" for this controller.
Click the button in the tool interface. Your drive should appear in one of the numbered slots, showing its Flash ID and current error status. Step 4: Configure Settings (Optional but Recommended)