Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 Exclusive Jun 2026

Or use :

Click , navigate to the USB folder containing the .inf driver files, and click OK .

The S100i SR Gen10 Software RAID is in the factory settings of many HPE servers. If you attempt to install Windows without first enabling it, the server's drives will not be recognized. You must first enable the controller and configure your RAID array using the server's UEFI System Utilities.

Select from the Operating System dropdown menu. Locate the Driver - Storage Controller section. Or use : Click , navigate to the USB folder containing the

: Supports standard entry-level configurations, including RAID 0, 1, 5, and 10.

Essential for sending hardware storage alerts (e.g., degraded array, predictive drive failure) to your IT monitoring consoles or iLO log.

Once loaded, your configured logical RAID volumes will appear. Select the target partition and continue the installation normally. You must first enable the controller and configure

(Note: The slot number might differ; replace "0b" as needed based on your system output).

: The HPE Smart Array SR Gen10 User Guide explains the differences between S-class (software), E-class, and P-class controllers, along with configuration steps.

is a software-based storage solution that enables basic data protection and performance for entry-level SATA configurations on HPE ProLiant Gen10 servers. Ensure files like hpssa3g7.inf

During the "Where do you want to install Windows?" screen, click Load Driver .

If you are not using (which automatically injects drivers), follow these manual steps:

Complete Guide to HPE Smart Array S100i SR Gen10 SW RAID Drivers for Windows Server 2022

Choose a destination folder. Ensure files like hpssa3g7.inf , hpssa3g7.sys , and hpssa3g7.cat are visible in the directory structure.