You're looking for a report related to the Adjustment Program for Epson SX125. Here's some information:

: Click Particular Adjustment Mode and select Waste ink pad counter . Initialization : Click Check to read the current counter value. Select the counter boxes and click Initialization .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

If you are seeing different symptoms or are unsure if this is the right fix, you can share the specific error message your computer shows, and I can tell you if a reset is the best path.

The Epson Stylus SX125 Adjustment Program (also known as a ) is a maintenance utility used to service internal hardware errors. Its primary use is resetting the Waste Ink Pad Counter , which triggers a "Service Required" message when the printer's internal pads are theoretically full. Key Functions

If your Epson printer is showing the , you can usually fix it by downloading the Epson SX125 adjustment program and following the reset procedure to clear the waste ink pad counter.

While the physical pads might not actually be overflowing yet, the printer will refuse to print until this digital counter is reset to zero. The Adjustment Program is the only tool that can perform this digital reset. Key Features of the Adjustment Program

Your Epson printer uses a maintenance box filled with internal absorbent pads to collect waste ink from print head cleaning cycles. To prevent overflow, Epson programs its printers with a waste ink counter. Once this counter hits a certain limit, the printer automatically shuts down, displaying the "Service Required" error, essentially a lock-out until the counter is reset.

: The most common use. When the internal counter reaches 100%, the printer stops working to prevent ink overflow. This tool resets that counter to 0%.

Click on the Particular Adjustment Mode button on the right side of the screen.

Connect it to your Windows PC using a high-quality USB cable.

Resetting the digital counter physically clean the ink pads.

Check the Main Pad Counter box once more, and click the Initialization button. A warning prompt will pop up asking for confirmation; click OK .

Resetting the software counter does not empty the physical ink pads. If you reset the printer multiple times, the ink may eventually leak from the bottom of the printer. It is recommended to wash the physical pads or install an external waste ink tank.

(some offer it for free, while others charge a small fee for a one-time use key).