Lambert Lx | 24 Fi Manual English

The flue pipe must slope slightly downward away from the boiler (1% slope) to prevent rainwater or condensation from running back into the combustion chamber. 4. First-Time Start-Up and Operation

Confirms the burner is lit and actively heating.

: As a convectional boiler, it may be less efficient than newer "Premix Condensing" models. Reliable Brand : Backed by Baymak/Baxi's quality standards.

If you want, I can expand any section into full procedural checklists, produce detailed performance tables (I’ll assume standard atmosphere and you provide weights/altitudes), or draft a printable 1-page quick reference checklist. Which would you like? Lambert Lx 24 Fi Manual English

Avoid unverified third-party websites charging for manual downloads. The manual should be free.

Check if the pump is spinning. System may require flushing or pump replacement. How to Reset the Boiler If a volatile fault occurs (such as E01 or E02):

The pressure gauge should be checked regularly. If the pressure drops below 0.5 bar, the boiler may not start. To increase pressure: Locate the filling loop (usually under the boiler). The flue pipe must slope slightly downward away

Ensure that only the radiators in rooms you are using are on.

Set your desired heating and hot water temperatures using the control knobs. Topping Up System Pressure:

The system water pressure for the heating circuit should be maintained between (with the ideal operating range around 1.2–1.5 bar) when the system is cold. : As a convectional boiler, it may be

: Adjusts central heating loop temperature and toggles between Summer mode (hot water only) and Winter mode (heating + hot water). Right Control Knob : Manages tap water temperature limits.

Use the filling valve under the boiler to top up the system to 1.2 bar. Check your radiators, valves, and pipework for slow leaks if this code keeps appearing. 5. Maintenance and Safe Operation Guidelines