Emax Es08ma Ii Datasheet Better -

| Feature | ES08A | ES08MA (v1) | | |---------|-------|-------------|----------------| | Gear material | Nylon | Metal | Metal | | Torque @6V | 1.6 kg·cm | 1.7 kg·cm | 1.8 kg·cm | | Speed @6V | 0.12 s/60° | 0.11 s/60° | 0.10 s/60° | | Centering accuracy | ±2° | ±1.5° | ±1° | | Potentiometer | Standard | Standard | Improved linearity |

Note: The servo is designed to work with a 50Hz PWM signal, standard for analog servos. 4. Common Applications Emax Es08ma Ii Datasheet

The "II" version uses a dual-ball bearing system on the output shaft, drastically reducing gear backlash and play over time. | Feature | ES08A | ES08MA (v1) |

Source: Specifications compared from 100y.com.tw and elportal.pl . Source: Specifications compared from 100y

The Emax ES08MA II differentiates itself from standard 9g micro servos through several key design choices, primarily its all-metal gear train. This section will explore those features in detail.

scale RC vehicles (such as the Axial SCX24 platform) to handle high torque demands.

| Parameter | Value | |-----------|-------| | | Emax ES08MA II | | Type | Micro Analog Servo | | Gear Material | Metal (Brass & Aluminum combination) | | Weight | 12.5g ± 0.2g | | Dimensions | 23 x 12.2 x 24 mm (0.91 x 0.48 x 0.94 in) | | Operating Voltage | 4.8V to 6.0V (6.0V recommended for max torque) | | Stall Torque (4.8V) | 1.6 kg·cm (22.2 oz·in) | | Stall Torque (6.0V) | 2.0 kg·cm (27.7 oz·in) | | Operating Speed (4.8V) | 0.12 sec/60° | | Operating Speed (6.0V) | 0.10 sec/60° | | Dead Band Width | ≤5 μs | | Temperature Range | -20°C to +60°C | | Connector Type | JR (Futaba compatible – 3-pin 0.1” spacing) | | Wire Length | 250 mm ±10 mm |