Turn the printer ON when prompted by the installer. Once the installation is finished, you can perform a test print through the Windows "Printer Properties" menu to verify the connection. Additional Resources
If you are facing issues with your printer, or are installing it for the first time, this article provides the official driver download links and a step-by-step guide to installing the Tysso PRP-300 Go to product viewer dialog for this item. driver on Windows 10 (32-bit and 64-bit). Tysso PRP-300 Go to product viewer dialog for this item. Driver Download for Windows 10
Choose the appropriate communication interface (e.g., , Serial, or TCP/IP).
If the driver downloaded as a folder with .inf , .sys , and .cat files: tysso prp-300 driver download windows 10
Before initiating installation, confirm your hardware parameters match the core technical profile of this device: : Direct Thermal Line Printing Print Speed : 250 mm/second Resolution : 203 DPI (576 dots/line)
: If you are using a USB connection, you may need to install the Virtual COM driver
This indicates an incorrect driver or a mismatch in the baud rate (for Serial/COM connections). Turn the printer ON when prompted by the installer
driver is directly from the manufacturer’s official support page.
Contact the original reseller or check these archived driver packs:
Ensure the printer is assembled with paper and connected to your PC via the USB, Serial, or Ethernet cable, but keep the power OFF initially. driver on Windows 10 (32-bit and 64-bit)
If using USB, the system will prompt you to turn the printer on. Once powered on, the driver installation should complete automatically. Verify Installation: Devices and Printers in your Control Panel.
: Open the folder and locate the PRPDRVEN.EXE (or similar setup executable).
