Clean the target area of loose debris, dirt, or dust. Mask off any adjacent areas (like plastics, rubber seals, or glass) that you do not want stripped, as the chemical will damage them. Step 2: Application

Never open a can of Abro Paint Remover without the right gear. Because this is a heavy-duty solvent, standard household gloves won’t cut it. Use chemical-resistant Nitrile or Butyl gloves.

Standard latex or thin nitrile household gloves will dissolve when exposed to heavy solvents. You must use the correct gear:

Disclaimer: This information is for educational purposes. Always consult the specific SDS provided by the manufacturer for the product being used. Technical Beacons For Trading ABRO PAINT REMOVER - Technical Beacons For Trading

: If purchased through a major distributor, they often provide SDS links on the product page. Safety Data Sheets (SDSs)

| Ingredient | CAS Number | % (Typical) | |------------|------------|--------------| | Methylene chloride (dichloromethane) | 75-09-2 | 60–80 | | Methanol | 67-56-1 | 5–15 | | N-Methylpyrrolidone (NMP) | 872-50-4 | 5–10 | | Ethylene glycol monobutyl ether | 111-76-2 | 1–5 | | Thickener / Corrosion inhibitor | Proprietary | Balance |

Abro Paint Remover (general-purpose solvent-based paint stripper)

Chemical splash goggles or a full-face shield are necessary to prevent ocular exposure.

: Use a NIOSH-approved respirator with organic vapor cartridges if working in areas with poor ventilation. Application Test Surface : Always test a small, inconspicuous area first. : Hold the can 12–16 inches from the surface when spraying. Clearing the Valve

Most industrial strippers, including older formulations of Abro, rely on Methylene Chloride (Dichloromethane). It is incredibly effective but requires extreme caution.

Spray or brush the ABRO Paint Remover onto the surface, ensuring thorough coverage.

Highly flammable liquids and vapors. Methanol is also highly toxic if absorbed through the skin or ingested. Paraffin Wax