Are you trying to fix a or a printing quality problem ?

Third-party reset utilities are often flagged as false positives by Windows Defender. Temporarily disable your antivirus software before extracting the tool. Run the Program: Open AdjProg.exe as an Administrator.

Running a reset does not fix clogged printhead nozzles. If your printer runs through its cycles but prints blank pages, use the maintenance menu on your computer to run a Nozzle Check followed by a Head Cleaning cycle.

Open the extracted folder, right-click , and select Run as Administrator .

: Scroll down the list, select Waste ink pad counter , and click OK .

A popup message on your computer states, "A printer's ink pad is at the end of its service life."

You can extend the time between resets by changing your habits:

Are you seeing a specific or blinking light pattern on your printer right now?

Keep holding them until the Wi-Fi lights flash, then release.

Use this if you’ve changed routers, forgot your Wi-Fi password, or the printer won’t connect.

Release both buttons. Once the power light stays steady, the Wi-Fi settings are reset to factory defaults. 2. Resetting the "Service Required" Error

The printer stops operating and flashes red lights to prevent internal ink spills when the built-in waste ink pads reach their calculated absorption capacity.

If you clarify you need to reset (e.g., error message, Wi-Fi issue, not printing), I can give you the exact step for your situation.

To clear the internal counter, you will need a computer connected to the printer via a (this process cannot be done over Wi-Fi).

: Contact an Epson Authorized Service Provider to have the pads physically replaced and the counter reset.

Unplug the power cord for 60 seconds and hold the power button down while it’s unplugged to drain any residual electricity.