Wittmann Tempro Plus D 360 Manual · Essential & Ultimate

Never disconnect hoses while the unit is operating or when the temperature is above 60°C.

Features self-optimizing controllers that adapt to the process behavior.

Always isolate the main power disconnect switch before opening the electrical cabinet or servicing internal components. Wittmann Tempro Plus D 360 Manual

Proper installation is critical for the long-term reliability of the Tempro Plus D 360.

Select a cooling mode (e.g., or Mold Purge Stop ). Never disconnect hoses while the unit is operating

Isolate both electrical power and pneumatic/hydraulic water pressure lines before removing any sheet metal protective enclosures.

Only use hoses explicitly rated for 160°C and a minimum of 10 bar working pressure. Step-by-Step Installation and Startup Only use hoses explicitly rated for 160°C and

The is a compact, microprocessor-controlled temperature control unit (TCU) designed for processing plastics (injection molding, blow molding, extrusion). The "D" series typically denotes "Dual" or specific heating/cooling configurations, while "360" generally refers to the heating capacity in kilowatts (approx. 12kW to 36kW depending on specific voltage configurations, often 36kW in this model designation) or the pump motor size.

Designed for pressurized water systems up to 360°F .

The "Plus" series interface is known for its simplicity.