Biosystems Bts 350 User Manual — No Ads

To help provide the most accurate instructions for your laboratory setup, please share a few additional details:

Supports Endpoint, Kinetics, Fixed-time, Differential Mode, and Absorbance.

Connect the waste tubing to a designated biohazard waste container. biosystems bts 350 user manual

Run normal and abnormal control serum samples. Verify that the values fall within acceptable standard deviations before testing patient samples.

| Gas | Low Alarm | High Alarm | Action | |-----|-----------|------------|--------| | O₂ | 19.5% | 23.0% | Evacuate / ventilate | | H₂S | 10 ppm | 15 ppm | Leave area, SCBA | | CO | 35 ppm | 200 ppm | Ventilate, mask | | LEL | 10% | 20% | Stop ignition sources | To help provide the most accurate instructions for

Inspect the pathway for structural kinks. Use a fine wire or syringe to clear clogs out of the sample needle. Run a pump calibration test. "Printer Out of Paper"

Dispose of the analyzer, fluidic components, and spent reagents in compliance with local environmental regulations regarding electronic waste (WEEE) and hazardous chemical management. Verify that the values fall within acceptable standard

The BTS-350 automatically logs control data points. Users can access the QC menu to view Levey-Jennings graphs to inspect for systemic shifts, systematic errors, or random errors exceeding acceptable Westgard rules (e.g., ±2SDplus or minus 2 cap S cap D ±3SDplus or minus 3 cap S cap D

Check for air bubbles in the flow cell or expired reagents. Conclusion