Crdroid Bootimg Install -

: Open a terminal on your PC and use the following command: fastboot flash boot .img Note: For some devices, you may need to flash to both slots using fastboot flash boot_a and fastboot flash boot_b [4, 6].

Complete Guide to crDroid Boot Image Installation: boot.img Installation Explained

Copy custom_boot.img to your internal storage. crdroid bootimg install

fastboot flash vbmeta vbmeta.img fastboot flash vbmeta_system vbmeta_system.img # if present

Depending on your device architecture, the exact flash command will differ slightly. Follow the sub-step that matches your device type. For Standard Devices (Single Boot Partition) : Open a terminal on your PC and

Your computer can only flash the boot image when the phone is in bootloader/fastboot mode.

Extract the folder to an easily accessible location on your PC (e.g., C:\platform-tools ). 3. Enable USB Debugging On your current ROM, go to . Follow the sub-step that matches your device type

If a random serial number string appears, your device is properly connected. If nothing shows up, check your USB drivers or swap your cable/USB port. Step 3: Installing the crDroid Boot Image

Once the images are flashed, it's time to enter the recovery environment to install the main ROM.