When looking at a standard RC522 module breakout board, you will interact with : How to Add RFID Module in Proteus - Cykeo
Press the key on your keyboard to open the "Pick Devices" window.
If you are using an Arduino in Proteus, ensure that you have the correct Arduino library installed and that the compiled hex file is generated from the Arduino IDE with the MFRC522 library by miguelbalboa.
In the PICK DEVICES window, search for "RC522" or "RFID". Step 2: Circuit Design in Proteus rc522 proteus library
Feeding 5V into the VCC pin. Fix: Use a 3.3V power terminal. If your real project uses a level shifter (because Arduino outputs 5V on MOSI/SCK), simulate that as well using a logic level converter component in Proteus.
Notes:
Double-click the Arduino Uno in Proteus and load the .hex file from your Arduino build folder. Click "Play". Troubleshooting the Simulation When looking at a standard RC522 module breakout
Complete Guide to Integrating the RC522 RFID Module in Proteus
The library typically consists of:
Comprehensive Guide to Using the RC522 RFID Module Proteus Library Step 2: Circuit Design in Proteus Feeding 5V
This article provides a comprehensive guide on how to download, install, and use the RC522 RFID module library in Proteus 8 Professional for Arduino simulations. What is the RC522 RFID Module?
Let’s simulate a door access system:
Each file contains a unique, pre-programmed UID (Unique Identifier).
Once you've downloaded your library package (targeting EM-18 for simulation), follow these steps: