Simrad Rf300 Installation Manual -

The RF300 is designed to be mounted close to the rudder, ensuring the transmitter rod is perfectly aligned with the rudder's movement. 3.1 Choosing the Location

Go back to the main steering screen. Turn the wheel manually and look at the virtual rudder angle indicator bar. Ensure that turning the wheel to port shows port movement on the screen. If the display shows the opposite direction, reverse the Brown and White wires at the processor or toggle the "Invert Direction" setting in the installation menu. 6. Troubleshooting Common Issues

: Center the helm perfectly and press clear/confirm. simrad rf300 installation manual

Select , then choose Rudder Feedback Calibration . Follow the on-screen prompts:

Proper physical placement is the most critical factor for accurate rudder feedback. Review these geometric and environmental constraints before drilling any holes. Environmental Requirements The RF300 is designed to be mounted close

Attach the ball joints of the transmission link to the RF300 arm and the tiller arm.

Ensure you have the following items before starting the installation: Ensure that turning the wheel to port shows

Turn off all DC power to your marine electronics at the breaker panel.