Located on the main controller board in the machine room or control closet. It features a digital LED/LCD display and input buttons.
The resistor used for breaking is too hot. Solution: Check the braking resistor fan and ensure the resistor is not blocked.
The most common "halt" code. Indicates a break in the safety string. Check all landing door interlocks and car-top stop switches. schindler 5500 error codes work
Do not clear the fault immediately. Navigate to Fault Log > Last Event . Record:
Tags: Schindler 5500, Elevator Maintenance, Lift Error Codes, Schindler Troubleshooting, MRL Elevator, Facility Management Located on the main controller board in the
Move the JRH switch to RECALL or JREC to INSPECTION to reset control states.
To find out what is causing a shutdown, technicians use the User Interface (UI) board located inside the control cabinet (usually found in the top-floor door frame or a dedicated machine room). The SMLCD Screen Solution: Check the braking resistor fan and ensure
Schindler SMART 002 LED Error Codes | PDF | Elevator - Scribd
| Error Code | Immediate Action | Root Cause Probability | | :--- | :--- | :--- | | 1201 | Clean door tracks | 80% | | 3401 | Check encoder cable | 65% | | 3512 | Test braking resistors | 90% | | 4210 | Relearn hoistway | 100% required | | 5012 | Verify CAN termination | 70% |
signals; check if the motor tries to open/close but times out. Technical Resources