Bnd50 Se36 Instructions Full [portable] [PREMIUM · 2024]

Press and hold the CLOCK button, then repeatedly press the WEEK button until the current day (e.g., Mo, Tu, We, Th, Fr, Sa, Su) appears at the top of the display.

Repeat steps 1–3 to set programs 2 through 8, if necessary.

600W (e.g., pumps, motor loads, fridges) Minimum Time Interval: 1 minute Internal Battery: Rechargeable Ni-MH backup Step 1: Initial Hardware Activation

The BND50 SE36 typically supports up to 8 or 10 independent programs. bnd50 se36 instructions full

throughout the following steps.

Find the small R (Reset) hole or button. Use a paperclip or pen tip to press it. The screen will flash all digits, clearing any factory test data. Step 2: Set Current Time and Date

Manual override. Provides continuous, uninterrupted power out of the plug. Press and hold the CLOCK button, then repeatedly

Mechanical timers rely on the electrical frequency of your home wall outlet to keep time. If a power outage occurs, the timer will stop rotating during the blackout. You must manually turn the dial clockwise to re-align the correct time once power is restored. Pins are Stiff or Stuck

To operate the BND50-SE36, follow this step-by-step sequence:

Press HOUR and MIN to establish your target start time. throughout the following steps

| Sequence | Days Displayed | Meaning | | :--- | :--- | :--- | | | Mo Tu We Th Fr Sa Su | Schedule runs every day of the week. | | Press 2 times | (e.g., "Tu" only) | Schedule runs only on a single, selected day . Use "HOUR"/"MIN" to select the day. | | Press 3 times | Mo Tu We Th Fr | Schedule runs Monday through Friday . | | Press 4 times | Sa Su | Schedule runs only on weekends (Saturday & Sunday). | | Press 5 times | Mo Tu We Th Fr (Su removed) | Runs every day except Sunday . | | Press 6 times | Mo We Fr | Runs only on Monday, Wednesday, and Friday . | | Press 7 times | Tu Th Sa | Runs only on Tuesday, Thursday, and Saturday . | | Press 8 times | Mo Tu We | Runs only on Monday, Tuesday, and Wednesday . | | Press 9 times | Th Fr Sa | Runs only on Thursday, Friday, and Saturday . | | Press 10 times | No days shown (blank) | The timer program is deactivated and will not run. |

Press the PROG button. The screen will show 1 ON .

The timer will now turn devices on/off randomly between 6:00 PM and 6:00 AM. 6. Troubleshooting and Key Information